Maadico

POWTECH

POWTECH

August 27th, 2020
Timing
Location on map

Based on the definition from the National Efficiency Organization of Iran, productivity is the ratio of the obtained desirability in a production process (outputs) to the amount of resources (inputs) which is consumed. In general, productivity is the ratio of outputs to inputs; thus, if an industrial firm is able to produce and present more products or products with higher quality, its finished cost will become less and its profit will rise, thereby the firm will achieve economic growth. Many business managers engage in periodic cost reduction drivers in order to make their company’s operation more efficient and to boost profits.

 A cost reduction is entirely within the control of a company, whereas revenue increase is not. Organizations today are looking for opportunities to improve operational efficiencies and reduce cost without having a negative effect on customer service levels. Production and supply chain management can help reduce costs by connecting every unit in the supply chain partners, and offer visibility into the demand and supply side of the chain

Highlights

. Production and supply chain management involves a number of drivers through which acquired raw materials are converted into finished goods for sale to customers. In turn, these drivers involve several processes that offer opportunities for cost reduction. Common drivers include procurement, design of the supply chain, distribution, transportation, warehousing, and collaboration. Cost reduction requires timely and improved decision making for common processes under each driver. There are two different approaches in order to measure and analyze efficiency: input-oriented and output-oriented.

 In the former approach, it is assumed that production and income are fixed, and then it is tried to minimize the entities such as production factors and their related cost and supply, transportation and distribution cost. However, in the latter approach, we try to maximize the output and income, assuming that the amounts of entities are fixed.

The steel industry is often referred to as a ‘key’ and ‘strategies’ industry. This is not only because of its importance for development but also because of the characteristics of the production process. The steel industry has distinct characteristics, such as highly capital intensive, long life of products, and its contributors in the global market, that differentiate it from other industries. This means that low cost production is, in general, a prerequisite to become a market winner and companies cannot rely on increased prices to ensure their profitability.

Highlights

 Therefore, the supply chain and logistics system in this industry appear to be complex. In this study, steel industry supply chain in Iran – including raw material supply, steel production and finish product distribution- is modeled, assessed and evaluated in order to improve efficiency with input-oriented approach using mathematical linear programming.

POWTECH is the undisputed number one worldwide for powder, granulate and bulk solids technologies. It reflects the current state of mechanical process engineering and analytics – and thus provides a unique overview for a variety of industries.

From the pharmaceutical, chemical and food industries to the glass, building materials and paper industries, POWTECH is looking for project engineers and production managers as well as bulk goods experts for future-oriented innovations for crushing, screening, mixing, conveying, dosing or granulating and much more.

Highlights

Everything in motion – analyzing, crushing, screening, mixing, conveying, storing, dosing and compacting – mechanical process engineering is full of dynamic processes and POWTECH is the platform on which you can present your latest product innovations and services to the most important industrial sectors.

  • Basic process for powder and bulk goods
  • Apparatus construction and process components
  • Packing and filling
  • Measure, control, automate
  • Nanoparticle technology
  • Safety and environmental technology
  • Quality control, assurance and management (QC, QA and QM)
  • Services

In the field of mechanical process engineering, POWTECH is the largest and most international industry platform worldwide for processes that produce quality products from powder, granulate, bulk material and liquid.

Convince yourself of the technical depth of the discussions from engineer to engineer . Here you will meet trade visitors with specific questions and a deep understanding.

Highlights

Innovation for shredding, screening, mixing, conveying, dosing or granulating – nowhere else are so many machines, technologies and large exhibits exhibited and demonstrated. The offer segment includes:

  • Basic process for powder and bulk goods
  • Apparatus construction and process components
  • Packing and filling
  • Measure, control, automate
  • Nanoparticle technology
  • Safety and environmental technology
  • Quality control, assurance and management (QC, QA and QM)
  • Services

With new formats and unsurpassed technical range to the recipe for success: POWTECH once again convinced this year as the leading international trade fair for the powder and bulk goods industries. Over three days, around 14,200 * visitors could experience a first-class trade fair program and make useful contacts. 824 exhibitors from 35 countries presented their innovations in six halls at the Nuremberg exhibition center. Numerous lectures in the specialist forums with a focus on chemistry, food and pharmaceuticals conveyed the latest scientific findings. The PARTEC Congress for Particle Technology also shone with more than 500 participants from 30 countries. The networking campus was particularly well received as a new concept for entrepreneurs and scientists and, with its interactive program, was a real highlight at POWTECH.

Machines in live operation and exchange of experts at the highest level and inspiring lectures – after three days at the fair, POWTECH 2019 closed its gates again. “We had set ourselves the goal of convincing with a high-quality exhibition, new approaches and a varied, technically demanding lecture program with a training character. And that is exactly what we have succeeded in – I heard from a lot of feedback – ”concludes Beate Fischer, head of POWTECH. Around 14,200 trade visitors took part in the fair – 40 percent of them from abroad. This underpins that POWTECH is the undisputed industry get-together for the powder and bulk goods community at international level. In addition to Germany, top exhibitors came from Austria, Italy, Switzerland and the Netherlands.

Highlights

Satisfied exhibitors and trade visitors

This year, the extraordinarily positive mood in the halls and in the specialist forums is more than convincing. The exhibiting companies used a total area of ​​around 26,700 square meters. As an established world’s leading trade fair, POWTECH offered industry representatives an incomparable opportunity to network and exchange from expert to expert – and this for the 21st time in Nuremberg. Initial surveys during the trade fair show that 87% of the exhibitors expect follow-up business due to the contacts and initiations at POWTECH 2019. 

Networking campus as a success format

The Networking Campus ideas laboratory met with a positive response – both among visitors and active participants. 30 lectures and two panel discussions invited to have a say in the trend topics of tomorrow. In addition to scientific institutes, associations and start-ups, established players from the individual sectors were also able to present their developments and ideas. The open, moderated lecture stage was used for discussion at eye level and was particularly well received by campus visitors. “We will certainly reinstall the networking campus at future events. It has simply proven itself as a suitable format and brings enormous added value to POWTECH, ”Beate Fischer announces. “We are particularly pleased that well-known companies have discovered the networking campus for themselves and actively supported them with their know-how,”

Recruiting Day as a point of contact for initial interviews

The Recruiting Day on the third day of the fair was very popular and showed that POWTECH and the Networking Campus were ideal for the first contact between employers and potential applicants.

Highlights

PARTEC: particle technology with everyday relevance

The world-renowned congress for particle technology, PARTEC, also achieved a gratifying result. 500 participants from 30 countries were able to take new impulses and expert knowledge with them at first hand. Under the motto “Particles for a better life”, the particle technology representatives had ample opportunity to illuminate and discuss particle technology in relation to different areas of life such as cosmetics, medicines and cleaning agents. A total of six keynote speakers offered deep insights into areas such as additive manufacturing, CO2 reduction and future technologies from the life sciences in the English-language program. 250 lectures and the exhibition of 180 scientific posters ensured an all-round package at PARTEC.

Award for excellent research

The ideal sponsor of the conference, the VDI Society for Process Engineering and Chemical Engineering, also awarded the Friedrich Löffler Prize to Junior Professor Carsten Schilde from the TU Braunschweig as part of the PARTEC opening ceremony. In his work, the scientist combines basic particle technology research with future-oriented, product-related research and development. The young talent award honors young experts from industry and research for special services in the areas of particle research, technology and product design.

New chairman appointed

At the end of this year’s PARTEC, Prof. Stefan Heinrich, Head of the Institute of Solid Process Technology and Particle Technology at the Technical University of Hamburg, chaired his successor Prof. Dr.-Ing. Arno Kwade from the Technical University of Braunschweig, Institute for Particle Technology, handed over for PARTEC 2022. The congress takes place every three years parallel to the spring edition of POWTECH.

Concentrated knowledge in the specialist forums and special shows

The latest findings and in-depth special knowledge from the areas of food, pharmaceuticals and chemistry were conveyed in the two specialist forums. Pharmaceutical representatives had the chance to learn more about the production of pharmaceutical additives, tabletting, coating and continuous manufacturing in the English-language program of the Forum Pharma.Manufacturing.Excellence – coordinated by the Working Group for Pharmaceutical Process Engineering (APV). The lectures and table top exhibitions were supplemented by corresponding guided tours.

The Chemical & Food expert forum was also impressive. There everything revolved around cutting-edge topics such as compressed air supply, food safety and explosion protection. The latter was particularly popular. The controlled explosions in the exhibition park showed live how the prevention of accidents in production works. The VDMA special show “Dust Knows Borders – Free Trade Does Not” showed exhibits used for drying processes worldwide.

POWTECH World is a global network of trade fairs and conferences related to mechanical process engineering. The events of POWTECH World form the ideal platform for global knowledge exchange and new, worldwide business relationships.

POWTECH offers manufacturers of machines and systems for the life science industry the right platform. Production managers, process engineers and active ingredient manufacturers from leading companies in the life science industries come to POWTECH to find specific solutions.

Source:

https://www.powtech.de/en

Note:

The images and text displayed above are under the copyright law and authority of the holder of the event and image and will not be used for any marketing, financial and profiteering of any kind. The Goal of these articles is merely further publicity.

How Maadico Helps its clients in Professional Exhibitions?